FINEST PLASTER TO
THE WALLS.


IMPORTED
GYPSUM PLASTER.

BUILDON Gypsum Plaster is produced from the light powder-density rock sourced from the purest mines. The advantage of our Gypsum is that it is the highest grade, pure white in colour, and 40% harder than any other Gypsum Plaster available in the Indian market. This Gypsum plaster can be applied easily and directly on all surfaces without the need for sand/cement/ plaster on the walls. The coverage in a 25Kg bag is 20 Sq. Ft. with a thickness of 12mm. The Fineness of 200 Mesh and purity over 85% ensure the best atomic bond and an absolute mirror finish.

Approved by
Download Imported gypsum Catalogue

Applied on

Brick Wall

Block Wall

RCC Structure

Application of Gypsum

The surface must be clean, dry, firm & free of dust.

Important properties like soluble salt content, thermal characteristics, shrinkage, strength, suction bonding properties etc of the background which is to plastered, should be evaluated before application.

Imported Gypsum Plaster can be applied directly on most of the surfaces like Brick Wall / Fly Ash Brick / Siporex Blocks / Concrete Surface / Sand Cement Plaster wall etc.

Once the plaster sets, install fixtures - utilize hooks and pins for lighter items, and employ plugs & screws for heavier objects, ensuring a secure grip.

Tools for Application

Mixing Bucket
Plumb BOB
Steel Trowel
Right Angled Scale
Line Dori
Aluminium Channel
Measuring Tape
Mixing Bucket
Plumb BOB
Steel Trowel
Right Angled Scale
Line Dori
Aluminium Channel
Measuring Tape

Direction For Use

The right way to mix is to add the
powder to water, not water to the powder.
The ratio of the powder should be 1:1.30.

Avoid mixing more powder that can be used within 15 minutes.

Do not temper or mix fresh material
once a mix has started to set.

After taking the required amount of plaster, always fold the open end,
to protect the plaster from moisture.

Setting time cannot be altered by diluting the mixture with water. For a longer setting time,the BUILDON retarder should be added.

Features

Single coat application

Very smooth finish

Can be applied directly on all walls/surfaces

Free of shrinkage cracks

Zero maintenance

Compatible with all types of paints

Technical Specifications

Purity

85% and above

Whiteness

85% Mily white

Fineness Mesh

Mesh 200,

Residue 2%

Setting Time

Intial 12 - 15 min.

Final 24 - 30 min.

Compressive Strength (Dry)

15 N/mm2

Coverage at 12mm thickness

20 Sq. ft.

Dry Bulk Density

690 Kg / m3

Standard Compliance

IS 2547-1 Part 1 & Part 2

Shelf Life

8 months

Application Process

Apply a thick layer on brick wall

Apply a thin layer on board

Apply directly on surface

Level it out with an aluminium channel or straight edge. Leave until partially set.

Steel Trowel is used to scrape dead plaster off the wall

Clean all tools

Apply a thick layer on brick wall

Apply a thin layer on board

Apply directly on surface

Level it out with an aluminium channel or straight edge. Leave until partially set.

Steel Trowel is used to scrape dead plaster off the wall

Clean all tools

More Products

Explore products that will meet your needs,