Buildon Bondit Plaster BOND+ is high-performance bonding agent for gypsum and sand cement….
Buildon Bondit Plaster Bond+, is a high-performance bonding agent for gypsum on concrete blocks/RCC surfaces. Further, it has waterproofing properties, and hence it prevents leakages from the cracks in the plaster.
Approved by
Advantages
Ready to apply single coat paint
A very strong mechanical cum chemical bond is created
Coverage is about 45 sqft/kg
The green colour of BONDIT gives it good visibility
No hacking is required on concrete surfaces. Hence prevention of microcracking in concrete & saving of labour
The bonding strength is more than 4.5kgs/sqft
It is an elastomeric material & hence can withstand movements in the structure without cracking
PH value is 8.5
Send Us Message
Buildon Bondit Plaster Bond+
Buildon Bondit Plaster Bond+ is a mixture of Polymer-Cement composite andcan be used for multiple purposes
Waterproof Coating
Bonding of Gypsum/Cement
Concrete Repairs
Waterproof Coating
Clean the concrete surface with brush.
Wash the concrete surface with water one hour before application of Bondit Plaster Bond+.
Fill any depression with mixture of cement, silica sand & Bondit Plaster Bond+ in the ratio of 1:1:50:0:50.
Mix Bondit Plaster Bond+ & cement in the ratio of 1:4.
Apply first coat of mixture on moist concrete.
After 4 to 6 hrs apply 2nd coat of mixture.
Third coat also can be applied if required.
Fresh coated surface should not be submerged in water for 48 hours.
After air drying for 4 to 6 hours, cure the coated surface by spraying water for 24 to 48 hours.
Surface is usable after 24 hours of treatment.
On terrace for top coat white cement can be used.
Bonding of Gypsum/ Plaster
Clean the concrete surface
Apply Bondit Plaster Bond+ with brush or spray machine.
After 30 to 40 minutes when Bondit Plaster Bond+ is tacky apply gypsum plaster.
Application Procedures
Mix the contents before use
BUILDON Bondit-Plaster Bond+ is used for high strength bonding of Gypsum Plaster to concrete blocks RCC. No hacking is required
Apply gypsum plaster after 24 hours or after the material has dried based on environmental conditions
Precautions
If the material goes in the eyes wash with water till the burning stops or immediately visit doctor.
Technical Specifications
Chemical Composition
Modified Hybrid System
Physical Appearance
Green Viscous Paint
Solid Contents
More than 52.50 %
Viscosity
2500 cps max
PH Value
8.5
Butt joint strength
More than 4500gm/scm
Film Characteristics
Green granular flexible
Handling & Storage
Protect from frost. Containers once opened should be shut tightly to prevent contamination. Stocks should be used on a first in, first out basis.
Packing
20kgs Plastic Buckets
Shelf Life
6 months
More Products
Explore products that will meet your needs,
BONDIT-151 is high performance bonding agent for Gypsum on concrete blocks/RCC surfaces.
Buildon P-20 is a Premixed sand cement plaster. It is specially formulated for exterior and interior plastering work to …